"BLE mesh" 修訂間的差異
(→Programming) |
(→Light example) |
||
| (未顯示同一使用者於中間所作的 4 次修訂) | |||
| 行 6： | 行 6： | ||
* nRF5_SDK_15.3.0_59ac345 | * nRF5_SDK_15.3.0_59ac345 | ||
* nrf5SDKforMeshv310src | * nrf5SDKforMeshv310src | ||
| + | |||
| + | === Toolchain === | ||
| + | * gcc-arm-none-eabi-7-2018-q2-update-linux.tar.bz2 | ||
| + | * export PATH=$PATH_TOOLCHAIN_BIN:$PATH | ||
=== Cmake build === | === Cmake build === | ||
| 行 13： | 行 17： | ||
=== Programming === | === Programming === | ||
| − | + | *If nrfutil fail, try more times!!! | |
| − | + | * Create app package | |
| − | + | ** nrfutil pkg generate --hw-version 52 --sd-req 0x00 --application-version 1 --application nrf52840_xxaa.hex zip.zip | |
| − | + | * Display package info | |
| − | + | ** nrfutil pkg display dfu.zip | |
| − | + | * Program the package | |
| − | + | * sudo nrfutil dfu usb-serial -pkg zip.zip -p /dev/ttyACM0 | |
| − | + | * Using tool "nRF connect" in windows is better | |
| − | + | [[File:NRF_Connect_Programmer.jpg|200px|nrf connect]] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | === Touble shooting === | |
| − | + | * Lost provision | |
| − | + | ** erase provision data | |
| − | |||
| − | |||
| − | |||
| − | + | <pre> | |
| − | [[File: | + | .nrf_mesh_flash : |
| + | { | ||
| + | PROVIDE(__start_nrf_mesh_flash = .); | ||
| + | KEEP(*(SORT(.nrf_mesh_flash.*))) <<---------------------------remove, to allow section recycle | ||
| + | PROVIDE(__stop_nrf_mesh_flash = .); | ||
| + | } > FLASH | ||
| + | </pre> | ||
| + | |||
| + | ** program again, then, program back to original one | ||
| + | |||
| + | === Light example === | ||
| + | * program light_switch_client_nrf52840_xxAA_s140_6.1.0 + s140_nrf52_6.1.0_softdevice.hex | ||
| + | * program light_switch_server_nrf52840_xxAA_s140_6.1.0.hex + s140_nrf52_6.1.0_softdevice.hex | ||
| + | [[File:Ble_mesh_light.jpg|200px|nRF5x Mesh client/server]] | ||
於 2019年4月13日 (六) 11:27 的最新修訂
目錄
Prepare
- Platform: nRF52840
- Board: PCA10059
SDK & Mesh SDK
- nRF5_SDK_15.3.0_59ac345
- nrf5SDKforMeshv310src
Toolchain
- gcc-arm-none-eabi-7-2018-q2-update-linux.tar.bz2
- export PATH=$PATH_TOOLCHAIN_BIN:$PATH
Cmake build
- cd nrf5SDKforMeshv310src
- mkdir build & cd build
- cmake -G Ninja .. -DSDK_ROOT=$PATH_OF_NRF5_SDK -DPLATFORM=nrf52840_xxAA -DBOARD=pca10056 <---for nrf52840
Programming
- If nrfutil fail, try more times!!!
- Create app package
- nrfutil pkg generate --hw-version 52 --sd-req 0x00 --application-version 1 --application nrf52840_xxaa.hex zip.zip
- Display package info
- nrfutil pkg display dfu.zip
- Program the package
- sudo nrfutil dfu usb-serial -pkg zip.zip -p /dev/ttyACM0
- Using tool "nRF connect" in windows is better
Touble shooting
- Lost provision
- erase provision data
.nrf_mesh_flash :
{
PROVIDE(__start_nrf_mesh_flash = .);
KEEP(*(SORT(.nrf_mesh_flash.*))) <<---------------------------remove, to allow section recycle
PROVIDE(__stop_nrf_mesh_flash = .);
} > FLASH
- program again, then, program back to original one
Light example
- program light_switch_client_nrf52840_xxAA_s140_6.1.0 + s140_nrf52_6.1.0_softdevice.hex
- program light_switch_server_nrf52840_xxAA_s140_6.1.0.hex + s140_nrf52_6.1.0_softdevice.hex
