"ODROID-C4" 修訂間的差異

出自 flip the world
前往： 導覽、 搜尋
(→‎Build Android)
 
(未顯示同一使用者於中間所作的 6 次修訂)
行 13： 行 13：
 
== Build Android ==
 
== Build Android ==
  
−
* Download Toolchains:
+
=== Download Toolchains ===
−
** U-boot
+
; U-boot
−
*** http://releases.linaro.org/archive/14.09/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.9-2014.09_linux.tar.xz
+
: http://releases.linaro.org/archive/14.09/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.9-2014.09_linux.tar.xz
−
*** http://releases.linaro.org/archive/14.04/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2014.04_linux.tar.xz
+
: http://releases.linaro.org/archive/14.04/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2014.04_linux.tar.xz
 +
; Linux kernel
 +
: https://releases.linaro.org/components/toolchain/binaries/6.3-2017.05/aarch64-linux-gnu/gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu.tar.xz
  
−
** Linux kernel
+
=== Set PATH ===
−
*** https://releases.linaro.org/components/toolchain/binaries/6.3-2017.05/aarch64-linux-gnu/gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu.tar.xz
 
−
 
 
−
* Set PATH
 
 
<pre>
 
<pre>
 
$ export PATH=$PATH:/opt/toolchains/gcc-linaro-aarch64-none-elf-4.9-2014.09_linux/bin
 
$ export PATH=$PATH:/opt/toolchains/gcc-linaro-aarch64-none-elf-4.9-2014.09_linux/bin
行 27： 行 26：
 
$ export PATH=$PATH:/opt/toolchains/gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu/bin
 
$ export PATH=$PATH:/opt/toolchains/gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu/bin
 
</pre>
 
</pre>
−
 
+
=== Check out full source code ===
−
* Check out full source code
+
; 32 bit
−
** 32 bit
 
 
<pre>
 
<pre>
 
$ mkdir odroid-c4
 
$ mkdir odroid-c4
行 36： 行 34：
 
$ repo sync
 
$ repo sync
 
</pre>
 
</pre>
−
** 64 bit
+
; 64 bit
 
<pre>
 
<pre>
 
$ mkdir odroid-c4
 
$ mkdir odroid-c4
行 44： 行 42：
 
</pre>
 
</pre>
  
−
== Installing initial images ==
+
=== Build ===
−
*Select fastboot mode by turning ON switch 3 (for details, refer to the HiKey 960 Getting Started guide).
 
−
*Power the board.
 
−
*Flash initial images:
 
−
** cd device/linaro/hikey/installer/hikey960
 
−
*Turn OFF switch 3 and power cycle the board.
 
−
 
 
−
== Flashing images ==
 
−
*Enter fastboot mode by turning ON switch 3.
 
−
*Flash images by running the following commands:
 
−
** fastboot flash boot out/target/product/hikey960/boot.img
 
−
*Turn OFF switch 3 and power cycle the board.
 
−
 
 
−
== Building the kernel ==
 
−
*Run the following commands:
 
−
**mkdir repo-common
 
−
**cd repo-common
 
−
**repo init -u https://android.googlesource.com/kernel/manifest -b hikey-linaro-android-4.19
 
−
**repo sync -j8 -c
 
−
**rm -rf out
 
−
**rm build.config
 
−
**BUILD_CONFIG=hikey-linaro/build.config.hikey960 ./build/build.sh
 
−
*Update the kernel in the boot image.
 
−
**Copy hi3660-hikey960.dtb (out/android-hikey-linaro-4.19/dist/hi3660-hikey960.dtb) to the hikey-kernel directory as file hi3660-hikey960.dtb-4.19.
 
−
**Copy the Image file (out/android-hikey-linaro-4.19/dist/Image.gz-dtb) to the hikey-kernel directory as file Image.gz-dtb-hikey960-4.19.
 
 
<pre>
 
<pre>
−
cp repo-common/out/android-hikey-linaro-4.19/dist/hi3660-hikey960.dtb hikey960/device/linaro/hikey-kernel/hi3660-hikey960.dtb-4.19
+
$ source build/envsetup.sh
−
cp repo-common/out/android-hikey-linaro-4.19/dist/Image.gz-dtb hikey960/device/linaro/hikey-kernel/Image.gz-dtb-hikey960-4.19
+
$ lunch odroidc4-eng
 +
$ make -j<core number>
 
</pre>
 
</pre>
−
*Make the boot image:
 
−
**make bootimage -j24
 
  
−
== Enable UART ==
+
== One touch self install ==
−
* In repo-common/hikey-linaro
+
; Create image
 +
: make -j<core number> selfinstall
 +
 
 +
; Burn image
 
<pre>
 
<pre>
−
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+
$ sudo dd if=out/target/product/odroidc4/selfinstall-odroidc4.img of=/dev/sdd
−
index 80334e500..a2f1de30b 100644
+
$ sync
−
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+
$ sudo eject /dev/sdd
−
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
 
−
@@ -494,7 +494,7 @@
 
−
                        clock-names = "uartclk", "apb_pclk";
 
−
                        pinctrl-names = "default";
 
−
                        pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
 
−
-                      status = "disabled";
 
−
+                      status = "ok";
 
−
                };
 
−
 
 
−
                uart1: serial@fdf00000 {
 
−
@@ -508,7 +508,7 @@
 
−
                        clock-names = "uartclk", "apb_pclk";
 
−
                        pinctrl-names = "default";
 
−
                        pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
 
−
-                      status = "disabled";
 
−
+                      status = "ok";
 
−
                };
 
−
 
 
−
                uart2: serial@fdf03000 {
 
 
</pre>
 
</pre>
  
−
== Setting the serial number ==
 
−
=== To set the random serial number, run ===
 
−
**fastboot getvar nve:SN@16\_DIGIT\_NUMBER
 
−
*Bootloader exports the generated serial number to the kernel using androidboot.serialno=.
 
−
 
−
=== Setting monitor resolution ===
 
−
*Edit the device/linaro/hikey/hikey960/BoardConfig.mk parameter BOARD_KERNEL_CMDLINE and configure the video setting. For example, the setting for a 24-inch monitor is video=HDMI-A-1:1280x800@60.
 
  
 
== Android note ==
 
== Android note ==
行 116： 行 66：
  
 
== Reference ==
 
== Reference ==
−
* [https://source.android.com/setup/build/devices, Build steps]
+
* [https://wiki.odroid.com/odroid-c4/software/building_android, ODROID-C4 Building android]
−
* [https://snapshots.linaro.org/96boards/hikey960/linaro/aosp-master/latest/, Pre build image]
+
* [https://wiki.odroid.com/odroid-c4/odroid-c4, ODROID-C4]

於 2020年5月27日 (三) 16:03 的最新修訂

ODROID-C4

Board Description

ODROID-C4 Board
ODROID-C4 Detail

Pin definition

C4 40pinmap rev0.4.png

  • UART signals are driven at 1.8V.

Build Android

Download Toolchains

U-boot
http://releases.linaro.org/archive/14.09/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.9-2014.09_linux.tar.xz
http://releases.linaro.org/archive/14.04/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2014.04_linux.tar.xz
Linux kernel
https://releases.linaro.org/components/toolchain/binaries/6.3-2017.05/aarch64-linux-gnu/gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu.tar.xz

Set PATH

$ export PATH=$PATH:/opt/toolchains/gcc-linaro-aarch64-none-elf-4.9-2014.09_linux/bin
$ export PATH=$PATH:/opt/toolchains/gcc-linaro-arm-none-eabi-4.8-2014.04_linux/bin
$ export PATH=$PATH:/opt/toolchains/gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu/bin

Check out full source code

32 bit
$ mkdir odroid-c4
$ cd odroid-c4
$ repo init -u https://github.com/hardkernel/android.git -b g12_9.0.0_master
$ repo sync
64 bit
$ mkdir odroid-c4
$ cd odroid-c4
$ repo init -u https://github.com/hardkernel/android.git -b g12_9.0.0_64_master
$ repo sync

Build

$ source build/envsetup.sh
$ lunch odroidc4-eng
$ make -j<core number>

One touch self install

Create image
make -j<core number> selfinstall
Burn image
$ sudo dd if=out/target/product/odroidc4/selfinstall-odroidc4.img of=/dev/sdd
$ sync
$ sudo eject /dev/sdd


Android note

  • Disable ICMP for enable ping
    • sysctl -w net.ipv4.icmp_echo_ignore_all=0

Reference

取自 "http://tommy0804.ddns.net/wiki/index.php?title=ODROID-C4&oldid=396"