Hikey960

Pin definition

Build FW

• Download the Android source tree:
  • repo init -u https://android.googlesource.com/platform/manifest -b master
  • repo sync -j8

• Build:
  • . ./build/envsetup.sh
  • lunch hikey960-userdebug
  • make -j24

Installing initial images

• Select fastboot mode by turning ON switch 3 (for details, refer to the HiKey 960 Getting Started guide).
• Power the board.
• Flash initial images:
  • cd device/linaro/hikey/installer/hikey960
• Turn OFF switch 3 and power cycle the board.

Flashing images

• Enter fastboot mode by turning ON switch 3.
• Flash images by running the following commands:
  • fastboot flash boot out/target/product/hikey960/boot.img
• Turn OFF switch 3 and power cycle the board.

module ON or OFF feature option

• Edit inc/hal_feature_config.h in each example code

Note

• Disable ICMP for enable ping
  • sysctl -w net.ipv4.icmp_echo_ignore_all=0

Reference

• Build steps
• Pre build image