檢視Netgem的原始碼

==Project info==
Customer: Netgem<br>
Product: VDSL/LTE/2.4G/5G media gateway<br>
Main Chip: Lantiq GRX388<br>

==SVN info==
*Main SDK
** svn+ssh://172.16.1.4/var/svn/Netgem/UGW-5.4/trunk
** file:///var/svn/Netgem/UGW-5.4/trunk
*AR9580
** svn+ssh://172.16.1.4/var/svn/Netgem/atherous/trunk
** file:///var/svn/Netgem/atherous/trunk

==Build note==
* Using GNU make-3.80 to build the SDK
* Change profile
** ./scripts/ltq_change_environment.sh switch
* Build package only
** make package/feeds/open_applications/protobuf-compile V=99
* Config kernel_only
** If you want, you can also modify the kernel config for the selected target system. 
** simply run "make kernel_menuconfig" and the build system will unpack the kernel sources (if necessary), run menuconfig inside of the kernel tree, and then copy the kernel config to target/linux/<platform>/config so that it is preserved over "make clean" calls. 
* texinfo <span style="color:red">should under version 5</span>, for example, texinfo-4.12.tar.gz
* Reference 
** http://www.landley.net/writing/rootfs-howto.html
* Default ID / PASS : root / admin

==Programming note==
* switch jumper to UART mode
** cat ARX388_GW_HE_ADSL_SLCNAND_SAMPLE/u-boot.asc > /dev/ttyUSB0
** run update_gphyfirmware
** <<before update_nandboot, may run <span style="color:red">nand scrub</span> to erase whole nand first>>
** run update_nandboot
* switch jumper to NAND
** run update_gphyfirmware
** check "Internal phy firmware version: <span style="color:red">0x8434</span>"

==Release info==
=== Netgem-GRX388-1.0.0.0 ===
==== release date ====
* 2013/09/24

==== release note ====
* Day0 patch
* Sync Led with LTE plug/unplug Tx/Rx
* Add plug/unplug script (etc/hotplug.d/usb/netgem_load_drv.hotplug)
* Add Lte routing script (etc/hotplug.d/net/netgem.hotplug)
* Copy wifi & lte deamons into usr/sbin 
* Backup .config for SDK and kernel in unihan folder
* Mdify config/VRX388_GW_HE_VDSL_NON_BOND_LTE_SLCNAND_SAMPLE/.config for Netgem HW design

=== Netgem-GRX388-1.0.0.1 ===
==== release date ====
2013/10/07
==== release note ====
* Change UGW path to trunk in atherous Makefile
* Skip copy iwconfig into UGW from atherous porting
* Fixing the PPA warning msgs during LTE UL throughput test
* Add release note in SDK
* Move /sbin behind /usr/sbin in order to avoid using wong iwconfig
* Add SW version

=== Netgem-GRX388-1.0.0.2 ===
==== release date ====
2013/10/14
==== release note ====
* Enable Statistic/System Performance in Web

=== Netgem-GRX388-1.0.0.3 ===
==== release date ====
2013/10/15
==== release note ====
* Add 5G security WPA2 & pass:12345678
* Ath still needs wireless_tools under /sbin
For LTQ 2.4G iwconfig version issue, just do not copy iwconfig to /sbin
* Force 5G to HT40 MCS rate

=== Netgem-GRX388-1.0.0.4 ===
==== release date ====
2013/10/18
==== release note ====
* Change usb0 as lte0 for performance graphic

=== Netgem-GRX388-1.0.0.5 ===
==== release date ====
2013/10/18
==== release note ====
* No more change but atherous SDK which remove wireless_tools for confuse 2.4G/5G switching
* Add dual WAN support in config/VRX388_GW_HE_VDSL_NON_BOND_LTE_SLCNAND_SAMPLE
=== Netgem-GRX388-1.0.1.0 ===
==== release date ====
2013/12/11
==== release note ====
* Sync led when TX/RX
* Fixed - 2.4G/5G switching issue by patches
** patch 01-01-00-UGW-5.4-SW-CD-WLAN-patch
** patch 02-01-00-UGW-5.4-SW-CD-WLAN-3.4.1-patch
** patch UGW-5.4-ATHEROS-CD
* Support 5G control from web
=== Netgem-GRX388-1.0.1.1 ===
==== release date ====
2013/12/20

==== release note ====
* To indicate the wifi deamon the AP is down or up
* Add Dual_Wan and DNS solutions which provided by Ltq