出自flip the world 檢視Homebrewing的原始碼 頁面討論 閱讀檢視原始碼檢視歷史 ←Homebrewing 您沒有權限執行編輯此頁面,由於以下原因: 您請求的操作只有這個群組的使用者能使用:使用者 您可以檢視並複製此頁面的原始碼。 '''Homebrewing''' — eleven batches of hazy / New England IPA brewed at home in 10-litre batches, December 2025 to October 2026. Every batch is logged with gravity readings, pH, hop timing and a tasting note, and each recipe is version-controlled in git so every change can be traced back to the batch that caused it. This page summarises what was brewed, what went wrong, and the process rules that came out of it. <gallery mode="packed" heights="300"> File:Homebrew_glass_orange_glow.jpg|Orange Glow v2.3 (#0007), five weeks after brew day File:Homebrew_glass_in_hand.jpg|A finished hazy IPA, in the glass with the piz brewing logo File:Homebrew_keg_and_bottles.jpg|Keg and bottles, with the Strange Haze label in front </gallery> {| class="wikitable" |- ! Batches !! Period !! Batch size !! Styles !! Recipes (current version) |- | 11 (12 brews) || 2025-12 → 2026-10 || 6–11.5 L || Hazy IPA, DDH NEIPA, Milkshake IPA || 妃子起笑 Crazy Concubine (v4.4), Orange Glow (v2.6), Strange Haze (v1.1), Milkshake IPA (v1) |} == The data == [[File:Homebrew_og_fg_by_batch.png|900px|center|Original and final gravity of every batch]] The first six batches had no written recipe and wild original gravities (up to 1.110 — a 10.5% "IPA"). From #0007 on, every batch follows a versioned recipe and the OG has been pulled back into the 1.050–1.076 range the recipes are designed for. [[File:Homebrew_abv_attenuation.png|900px|center|ABV and apparent attenuation per batch]] Attenuation went from ~71% (early batches, under-pitched, no oxygen) to a consistent 81–88% once pure-oxygen pitching, yeast nutrient and modern yeast strains were adopted. #0011's 62% is not a stuck fermentation: it is a kit recipe with 50 g of unfermentable lactose, and it landed exactly on the kit's printed OG 1.052 / FG 1.020. [[File:Homebrew_gravity_curves.png|900px|center|Fermentation curves of four batches]] The single most useful chart. With one pack of Verdant and no oxygen (#0006) fermentation drags on for 12 days. With LalBrew Pomona, or two packs plus pure oxygen, ~90% of the sugar is gone within '''2 days'''. Any schedule written as "dry hop on Day 3" is simply wrong for these yeasts. [[File:Homebrew_plan_vs_actual.png|800px|center|Planned vs actual timing of key events]] Since #0009 each batch starts with a one-line written plan (dry-hop day and gravity, green-light day, transfer day, expected FG). The log then measures the error. The first two plans were badly off — fermentation finished 8–12 days early — and each new plan is corrected from the previous error. #0011's DH1, DH2 and FG all landed within a day of plan (1.0, 0.8 and 0.8 days early). [[File:Homebrew_ph.png|900px|center|Mash pH and finished-beer pH]] pH turned out to be the hidden cause of "too bitter" — and, in #0011, of "slightly sour". The same tap water gave a mash pH of 4.76 in one batch and 5.81 in another, so the correction has to go in either direction. #0011's mash was corrected to 5.37, but the wort measured 4.83 after the boil and was not corrected again; the beer finished at 3.94. In both #0008 (4.75 → 3.83) and #0011 (4.83 → 3.94) pH fell about '''0.9''' during fermentation, not the textbook 0.3–0.5 — this soft, low-alkalinity water has almost no buffer. == Batch log == {| class="wikitable sortable" |- ! # !! Date !! Beer / version !! Yeast !! OG → FG !! ABV !! Result / key lesson |- | 0001 || 2025-12-03 || DDH Hazy IPA || LalBrew New England || 1.062 → 1.018 || 5.8% || Bottle-conditioned. Lesson: add priming sugar, don't refrigerate during bottle conditioning. |- | 0002 || 2025-12-28 || Hazy IPA || Mauribrew Weiss || 1.040 → ? || – || Poor mash efficiency; dry-hop order wrong; forgot to measure FG before bottling. |- | 0003-1 || 2026-02-26 || IPA || Mauribrew ALE514 || 1.050 → 1.010 || 5.3% || Flat aroma and taste; too much priming sugar, vegetal smell. |- | 0003-2 || 2026-02-28 || IPA + 900 g oats || ALE514 || 1.056 → 1.016 || 5.3% || Under-pitched; bottled while airlock still active → gushers on opening. |- | 0004 || 2026-03-15 || Milkshake IPA || LalBrew New England || 1.110 → 1.030 || 10.5% || Lid not sealed (airlock silent 36 h); bottled while still fermenting; weak carbonation, slightly sour. |- | 0005 || 2026-04-23 || Milkshake IPA "light" || Verdant IPA || 1.102 → 1.030 || ~9.5% || '''Failed.''' Bittering hops 22 g instead of 6 g; bottles never carbonated — at ~9.5% ABV the yeast was too stressed to referment, and the cold crash removed what was left. Most poured away. |- | 0006 || 2026-05-09 || Hazy IPA || Verdant IPA || 1.062 → 1.008 || 7.1% || Second dry hop at Day 9 triggered '''hop creep''' (1.014 → 1.008). Clean, bitterness fine, aroma weak. First keg + forced carbonation. |- | 0007 || 2026-06-12 || Orange Glow v2.3 || Verdant IPA ||1.080 → 1.015 || 8.5% || First versioned recipe. Not hot, bitterness right after 3 weeks, but aroma lacking and colour unappealing. |- | 0008 || 2026-06-25 || Orange Glow v2.4 || LalBrew Pomona || 1.090 → 1.016 || 9.7% || Pomona hit 1.016 by Day 3 — dry hop missed its window. Finished pH 3.83 → harsh bitterness drowned the juice. |- | 0009 || 2026-07-29 || Orange Glow v2.5 "clean" || Pomona || 1.050 → 1.006 || 5.8% || Boiled off 4–5 L, OG shot to 1.110, over-diluted back to 1.050. pH 4.30 — bitterness finally right. Thin body, under-carbonated (keg fridge is 7–8 °C, not 3 °C). Passable daily hazy. |- | 0010 || 2026-08-26 || Strange Haze v1 (blueberry vanilla) || Verdant ×2 || 1.070 → 1.012 || 7.6% || Pre-boil OG check caught an over-concentrated wort in time. No harshness, no diacetyl — but not enough juice, sweetness, purple colour or vanilla; grainy from 20% oats. |- | 0011 || 2026-10-08 || 妃子起笑 v4.3 (PB Craft kit) || Weiss || 1.052 → 1.020 || 4.2% || Clean process — no diacetyl, oxidation or harsh bitterness, no bottle bombs — but weak aroma, thin "watery" body, pale (3–4 SRM) and slightly sour (pH 3.94). Every flaw traced to three fixable numbers: post-boil pH not corrected, CaCl₂ only 0.5 g, both dry hops added while still fermenting. Led to v4.4 and to recipe-wide changes. |} == The beers == ; 妃子起笑 · Crazy Concubine — Hazy Pale Ale (OG 1.052, ~5%) : The first recipe. v1's second dry hop went in after fermentation had finished and hop creep ate the body (FG 1.014 → 1.008, 5.8% instead of 5%). v3 fixed it with zero new cost — one dry hop during active fermentation, cooler mash, pure-oxygen pitch, no cold crash. v4 added a 78 °C whirlpool for front-end juiciness. #0011 brewed the PB Craft kit exactly as printed (v4.3) and hit the kit's numbers, which showed the kit itself is the limit. v4.4: 10 L instead of 11.5 L (OG back to 1.060), CaCl₂ 3 g, a post-boil pH check, and the dry hops swapped — Idaho Gem first, Citra + Amarillo last. #0002, the same kit, had used that "wrong" order by mistake — and had the lychee aroma #0011 lacked. ; Orange Glow — DDH NEIPA (OG ~1.066, ~7%) : The main development line: v1 → v2.6 across three brews. Swapped glucose for DME, Extra Pale for Golden Promise, Verdant for Pomona, added ALDC and Fermaid-O, moved to a split dry hop. #0009 drifted to a pale 5.8%; v2.6 brings back Munich for the orange-gold colour and uses a Strata / Mosaic / Nelson / Peacharine hop bill. ; Strange Haze — Imperial Milkshake IPA (blueberry vanilla) : Built around a pre-printed label (9% ABV, purple nebula), so the fruit is blueberry for colour. v1 was "neither here nor there"; v1.1 cuts bitterness, adds lactose back, raises mash to 69–70 °C and splits 800 g of blueberry between mid-fermentation and post-fermentation. ; Milkshake IPA — low residual sugar (6 L) : Body from oat/wheat protein instead of lots of lactose; unsweetened mango + passion fruit purée. Not yet brewed under this recipe. == Label and logo == The beers go out under the name '''piz brewing'''. The logo started from our dog, became a pencil sketch of just the ears and nose, and was finished with AI image generation. The labels were made the same way: many drafts generated and refined until one fit the beer. <gallery mode="packed" heights="200"> File:Homebrew_logo_dog.jpg|The original File:Homebrew_logo_sketch.jpg|Pencil sketch: ears and nose File:Homebrew_logo_final.jpg|Final logo File:Homebrew_label_strange_haze.jpg|Strange Haze label, made with AI image generation </gallery> == What I learned == === Fermentation === * '''Dry hop by gravity, not by the calendar.''' The first dry hop goes in when gravity has dropped about half-way from OG to FG, while yeast is still active (biotransformation + it mops up hop-creep sugar). With fast yeast that can be Day 1, so start measuring every 12 h from Day 1. * '''Split dry hop.''' DH1 during active fermentation for biotransformation; DH2 only after fermentation has stopped, so the CO₂ doesn't scrub the aroma away. After DH2, confirm gravity is stable again (second wave of hop creep). #0011 put both dry hops in while it was still fermenting, and the empty glass smelled only of malt. * '''The last dry hop is the aroma you smell.''' It soaks latest, is scrubbed least and has the least time to oxidise, so put the signature hop (e.g. Citra) there, loose rather than in a bag. Only bag the dry hop you plan to pull out. * '''Hop creep is real.''' Hop enzymes break down dextrins, so a late dry hop restarts fermentation: thinner body, higher ABV, and in bottles — gushers or bombs. * '''"Green light" before packaging:''' two gravity readings ~48 h apart that differ by ≤ 0.001, '''and''' at least 3 days of diacetyl rest at a beer temperature of 20–22 °C (water bath 21.5 °C). Since 2026-09 the rest time replaces the forced diacetyl test: below 18 °C the yeast barely cleans up diacetyl, above 24 °C it only adds fusel alcohols, so 3 days at 20–22 °C is the guarantee. After DH2 or fruit, hop creep can make new diacetyl, so hold 20–22 °C for another 48 h and re-check gravity before cold-crashing. #0011 was packaged before creep had stopped and still had no butter flavour. If a beer does taste buttery, warm the keg back to room temperature for 3 days. Never package on a fixed day count — #0003-2, #0004 and #0008 all did, and all had carbonation problems. * '''Pure oxygen 60–90 s before pitching''' lets a single dry pack ferment a 1.07+ wort; no starter needed. After pitching, oxygen is the enemy. * Fermenting beer runs 1–2 °C above the water bath during the first 48 h. Set the bath ~1.5 °C below the target beer temperature at peak, then raise it to 21.5 °C for the diacetyl rest. === Brew day === * '''Check pre-boil gravity and volume before boiling.''' Weigh the pot (total − empty pot weight ≈ litres), measure pre-boil gravity, and compute the target end volume = pre-boil points × litres ÷ target points. Boil to that volume, not to a timer. #0009 boiled off 4–5 L (normal is 1–2 L) and hit 1.110. * '''Boil gently, lid off.''' Hard boiling over-concentrates bitterness and scorches. Excess evaporation turned out to be a big part of the "nasty bitterness" in #0007/#0008. * '''Measure mash pH, not water pH, and be ready to go both ways.''' Sample 10–15 min after mash-in, cool to 20–25 °C, target 5.2–5.4. Keep both baking soda and phosphoric/lactic acid on hand. This soft, low-alkalinity water swings hard: ~1 g baking soda ≈ +0.67, 1 ml phosphoric ≈ −0.28 — use half steps and re-measure. Calibrate the pH pen every brew day and store the electrode wet. * '''Post-boil pH is a second, separate checkpoint.''' A long boil concentrates the acidity too: #0011 boiled 14.55 L down to 11.5 L and dropped from 5.37 to 4.83. Correct the cooled wort to 5.2–5.4 before pitching; with a ~0.9 drop in fermentation that lands the beer at ~4.4. (#0010 split the same 2 g of baking soda between mash and post-boil and had no sourness.) * '''Salt: CaCl₂·2H₂O 0.2 g per litre of total brewing water''' (≈ Ca 54 / Cl 96 ppm), no gypsum. The filtered water has almost no minerals; #0011's 0.5 g gave ~17 ppm chloride and ~9 ppm calcium, and the beer tasted like "sweet water". * Pale-malt grists (Extra Pale/Pilsner) tend to mash high (~5.7); grists with Munich plus gypsum tend to mash low. === Bitterness and aroma === * '''Fix bitterness at the source, never by cutting hops.''' The culprits were pH (finished pH 3.83 = throat-biting), gypsum (sulfate sharpens bitterness), over-boiling, hops left in too long, and drinking too young. Bittering hops go in a bag, on time, and come out after the boil; dry-hop bags come out after 2–3 days. * '''Whirlpool and dry hop do different jobs.''' Whirlpool (75–78 °C) gives juice on the palate; dry hop gives the aroma in the nose. Cutting either one loses something the other can't replace. * Aging softens bitterness but kills hop aroma at the same time — fix bitterness at the source and drink fresh (2–3 weeks) instead. * 0.5 kg oats + 1 kg wheat in 4.5 kg of grain is already enough haze; 1 kg of oats (20%) tasted grainy. * '''Lactose: go big or skip it.''' 50 g in 11.5 L (4.3 g/L) is far below the ~20–25 g/L you can taste — it added nothing. * '''A kit guarantees beer, not good beer.''' The PB Craft kit has no whirlpool hops, no specialty malt, and says nothing about salt or pH. Brewed exactly as printed (#0011), it gives a pale, thin, low-aroma beer; those four things have to be added. === Packaging === * '''Keg + forced carbonation''' is now the default (#0009 on). Bottle conditioning kept failing: too much sugar (#0003-1), bottling before fermentation finished (#0003-2, #0004), and #0005 at ~9.5% ABV, where the yeast could not referment. * '''Cold crash is now standard''' (since #0011): 2–4 °C for 24–48 h before transfer. #0006–#0011 never really cold-crashed, and all six got the same notes — weak aroma, "don't know what I'm drinking", grainy. Suspended yeast fits that picture; it is still a hypothesis, to be tested by drinking #0011's keg (no yeast) next to its bottles (live yeast). For bottle conditioning after a cold crash: under 7% ABV enough yeast remains; above 8%, add 1–2 g of an alcohol-tolerant yeast (e.g. EC-1118) at bottling. * '''Don't package on a falling gravity with sulfite in the keg.''' #0011 was packaged at 1.020 while still dropping: no metabisulfite for an early package (keep the yeast alive), and halve the priming sugar for bottles (4.5 g/L — it carbonated without gushing). * '''Never bottle the gravity samples.''' #0011's test bottle made from saved samples gushed and measured pH 3.5 — lactic infection from the open sample cup, not the fermenter (the normal bottles were 3.94). Drink samples on the spot; for a control bottle, fill one more from the main beer. * Low-oxygen transfer: purge the keg with CO₂ three times, fill from the bottom through the liquid post, minimum headspace. * Antioxidant in the keg: '''ascorbic acid 0.3 g + potassium metabisulfite 0.25 g per 10 L, always as a pair.''' Ascorbic acid alone makes H₂O₂, which with trace iron/copper (Fenton reaction) oxidises the beer worse than nothing. The chemicals are ~20% of the protection; the purging is the other 80%. * '''Measure the fridge.''' The keg fridge is actually 7–8 °C, so 2.4–2.5 volumes needs ~15 PSI, not the textbook 11–12 PSI. #0009 and #0010 were both under-carbonated for this reason. A small 3 L keg also absorbs CO₂ slowly — #0011 was only ~70–80% carbonated after 5 days at pressure; lay it down and shake for 2–3 minutes. <gallery mode="packed" heights="200"> File:Homebrew_mini_keg_regulator.jpg|Mini keg with CO₂ regulator: carbonation is set by pressure, not sugar File:Homebrew_mini_keg_tap.jpg|Mini keg with a wooden tap handle File:Homebrew_bottles_box.jpg|A case of bottles filled from the keg </gallery> === Method === * Write the plan down before brewing (one line: dry-hop day and gravity, green light, transfer, FG) and measure the error afterwards. The predictions are converging batch by batch. * Log everything with a timestamp — gravity with date and time, pH with temperature. Most of the lessons above only became visible once the numbers were next to each other. * Change one or two things per version. The recipe history (Crazy Concubine v1→v4.4, Orange Glow v1→v2.6) reads like a commit log: each version cites the batch that justified it. == Equipment == <gallery mode="packed" heights="200"> File:Homebrew_first_kit.jpg|Brew day #0001 (Dec 2025): kettle, fermenter, grain and hops File:Homebrew_hop_pellets.jpg|Hop pellets, straight from the vacuum pack File:Homebrew_mash.jpg|Mashing #0008, thermometer in the lid File:Homebrew_ir_thermometer.jpg|IR thermometer check on the kettle File:Homebrew_cooling_rig.jpg|Home-built cooling rig: thermoelectric cooler, power supply and thermostat, pumping cold water through the fermenter File:Homebrew_o2_co2_cylinders.jpg|CO₂ (left) and pure O₂ (right) cylinders with regulators File:Homebrew_fermenter_krausen.jpg|#0008 on Day 3: krausen, fermenting in the water bath File:Homebrew_hydrometer.jpg|Gravity sample from #0009 File:Homebrew_rapt_pill.jpg|RAPT Pill wireless hydrometer (Nov 2026), next to its box </gallery> * Kettle + fermenter in a temperature-controlled water bath; weigh-the-pot volume estimation * Pure O₂ cylinder with diffusion stone; refractometer + hydrometer; pH pen (4.01 / 7.00 buffers) * Inkbird IHT-1P instant-read thermometer (from #0010) * RAPT Pill wireless hydrometer and thermometer (from Nov 2026): floats in the fermenter and logs gravity and temperature over Bluetooth LE or 2.4 GHz Wi-Fi; range 0.95–1.12, rechargeable 18650 battery (USB-C) * 8 L keg on external CO₂; 128 oz mini keg for in-keg conditioning * Additives: Fermaid-O (2.5 g at pitch + 2.5 g at ~24 h), Maturex L ALDC 0.2–0.3 ml, CaCl₂ 返回到「Homebrewing」。