Tommy：Refactor: add Category:Projects

2026-08-21T05:17:42Z

Refactor: add [[Category:Projects ]]

←上個修訂		2026年8月21日 (五) 13:17的版本
第161行：		第161行：
	* [https://pypi.python.org/pypi/SpeechRecognition/3.2.0, SpeechRecognition 3.2.0]		* [https://pypi.python.org/pypi/SpeechRecognition/3.2.0, SpeechRecognition 3.2.0]
	* [http://www.speech.cs.cmu.edu/tools/lmtool-new.html, Sphinx Knowledge Base Tool]		* [http://www.speech.cs.cmu.edu/tools/lmtool-new.html, Sphinx Knowledge Base Tool]

			[[Category:Projects]]

Tommy：已建立頁面，內容為 "RPi3 + TR10 RPi3 control GPIO by speech recogination == Open source ==

 apt-get install rpi-upda…"

2018-08-23T02:39:19Z

已建立頁面，內容為 "450px|RPi3 + TR10 450px|RPi3 control GPIO by speech recogination == Open source == <pre> apt-get install rpi-upda…"

新頁面

[[File:RPi3 TR10.jpg|450px|RPi3 + TR10]]
[[File:Rpi_speech_gpio.gif|450px|RPi3 control GPIO by speech recogination]]
== Open source ==
<pre>
apt-get install rpi-update
apt-get install git-core
rpi-update

-> Connect your USB microphone (or camera+mic) and
-> reboot the RPi at this point

vi /etc/modprobe.d/alsa-base.conf

# change as follows:
# Comment this line
# options snd-usb-audio index=-2
# and add the following:
options snd-usb-audio index=0

-> close the file and reload alsa:

alsa force-reload

wget http://sourceforge.net/projects/cmusphinx/files/sphinxbase/\
0.8/sphinxbase-0.8.tar.gz/download
mv download sphinxbase-0.8.tar.gz
wget http://sourceforge.net/projects/cmusphinx/files/\
pocketsphinx/0.8/pocketsphinx-0.8.tar.gz/download
mv download pocketsphinx-0.8.tar.gz
tar -xzvf sphinxbase-0.8.tar.gz
tar -xzvf pocketsphinx-0.8.tar.gz

apt-get install bison
apt-get install libasound2-dev

cd sphinxbase-0.8
./configure --enable-fixed
make
make install

cd ../pocketsphinx-0.8/
./configure
make
sudo make install
</pre>

== GPIO MAP ==
pi@raspberrypi:~/projects/rpi/speech $ gpio readall
+-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
| | | 3.3v | | | 1 || 2 | | | 5v | | |
| 2 | 8 | SDA.1 | IN | 1 | 3 || 4 | | | 5V | | |
| 3 | 9 | SCL.1 | IN | 1 | 5 || 6 | | | 0v | | |
| 4 | 7 | GPIO. 7 | IN | 1 | 7 || 8 | 0 | IN | TxD | 15 | 14 |
| | | 0v | | | 9 || 10 | 1 | IN | RxD | 16 | 15 |
| 17 | 0 | GPIO. 0 | IN | 0 | 11 || 12 | 0 | OUT | GPIO. 1 | 1 | 18 |
| 27 | 2 | GPIO. 2 | IN | 0 | 13 || 14 | | | 0v | | |
| 22 | 3 | GPIO. 3 | IN | 0 | 15 || 16 | 0 | OUT | GPIO. 4 | 4 | 23 |
| | | 3.3v | | | 17 || 18 | 0 | OUT | GPIO. 5 | 5 | 24 |
| 10 | 12 | MOSI | IN | 0 | 19 || 20 | | | 0v | | |
| 9 | 13 | MISO | IN | 0 | 21 || 22 | 0 | OUT | GPIO. 6 | 6 | 25 |
| 11 | 14 | SCLK | IN | 0 | 23 || 24 | 1 | IN | CE0 | 10 | 8 |
| | | 0v | | | 25 || 26 | 1 | IN | CE1 | 11 | 7 |
| 0 | 30 | SDA.0 | IN | 1 | 27 || 28 | 1 | IN | SCL.0 | 31 | 1 |
| 5 | 21 | GPIO.21 | IN | 1 | 29 || 30 | | | 0v | | |
| 6 | 22 | GPIO.22 | IN | 1 | 31 || 32 | 0 | IN | GPIO.26 | 26 | 12 |
| 13 | 23 | GPIO.23 | IN | 0 | 33 || 34 | | | 0v | | |
| 19 | 24 | GPIO.24 | IN | 0 | 35 || 36 | 0 | IN | GPIO.27 | 27 | 16 |
| 26 | 25 | GPIO.25 | IN | 0 | 37 || 38 | 0 | IN | GPIO.28 | 28 | 20 |
| | | 0v | | | 39 || 40 | 0 | IN | GPIO.29 | 29 | 21 |
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
+-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+

== GPIO Adapter (using GPIO 12, 16, 18 and 22)==
<pre>
#include <stdio.h>
#include <string.h>
int main(int argc, char *argv[])
{
char tmp[125];
system("gpio mode 1 out");
system("gpio mode 4 out");
system("gpio mode 5 out");
system("gpio mode 6 out");

while(1)
{
scanf("%s",&tmp);
if(tmp != "\n")
{
if(!strcmp(tmp,"TOMMY"))
system("gpio write 1 1");
else
system("gpio write 1 0");

if(!strcmp(tmp,"MOLLY"))
system("gpio write 4 1");
else
system("gpio write 4 0");

if(!strcmp(tmp,"DAISY"))
system("gpio write 5 1");
else
system("gpio write 5 0");

if(!strcmp(tmp,"ANNIE"))
system("gpio write 6 1");
else
system("gpio write 6 0");

if(!strcmp(tmp,"OKAY"))
{
system("gpio write 1 1");
system("gpio write 4 1");
system("gpio write 5 1");
system("gpio write 6 1");
}
}
}
return 0;
}

</pre>

== GPIO MAP (says, OKAY) ==
pi@raspberrypi:~/projects/rpi/speech $ gpio readall
+-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
| | | 3.3v | | | 1 || 2 | | | 5v | | |
| 2 | 8 | SDA.1 | IN | 1 | 3 || 4 | | | 5V | | |
| 3 | 9 | SCL.1 | IN | 1 | 5 || 6 | | | 0v | | |
| 4 | 7 | GPIO. 7 | IN | 1 | 7 || 8 | 0 | IN | TxD | 15 | 14 |
| | | 0v | | | 9 || 10 | 1 | IN | RxD | 16 | 15 |
| 17 | 0 | GPIO. 0 | IN | 0 | 11 || 12 | 1 | OUT | GPIO. 1 | 1 | 18 |
| 27 | 2 | GPIO. 2 | IN | 0 | 13 || 14 | | | 0v | | |
| 22 | 3 | GPIO. 3 | IN | 0 | 15 || 16 | 1 | OUT | GPIO. 4 | 4 | 23 |
| | | 3.3v | | | 17 || 18 | 1 | OUT | GPIO. 5 | 5 | 24 |
| 10 | 12 | MOSI | IN | 0 | 19 || 20 | | | 0v | | |
| 9 | 13 | MISO | IN | 0 | 21 || 22 | 1 | OUT | GPIO. 6 | 6 | 25 |
| 11 | 14 | SCLK | IN | 0 | 23 || 24 | 1 | IN | CE0 | 10 | 8 |
| | | 0v | | | 25 || 26 | 1 | IN | CE1 | 11 | 7 |
| 0 | 30 | SDA.0 | IN | 1 | 27 || 28 | 1 | IN | SCL.0 | 31 | 1 |
| 5 | 21 | GPIO.21 | IN | 1 | 29 || 30 | | | 0v | | |
| 6 | 22 | GPIO.22 | IN | 1 | 31 || 32 | 0 | IN | GPIO.26 | 26 | 12 |
| 13 | 23 | GPIO.23 | IN | 0 | 33 || 34 | | | 0v | | |
| 19 | 24 | GPIO.24 | IN | 0 | 35 || 36 | 0 | IN | GPIO.27 | 27 | 16 |
| 26 | 25 | GPIO.25 | IN | 0 | 37 || 38 | 0 | IN | GPIO.28 | 28 | 20 |
| | | 0v | | | 39 || 40 | 0 | IN | GPIO.29 | 29 | 21 |
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
+-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+

== Shell example ==
* pi@raspberrypi:~/project/rpi/speech $ pocketsphinx_continuous -lm 7610.lm -dict 7610.dic -inmic yes | ./adapter

== Reference ==
* [https://wolfpaulus.com/journal/embedded/raspberrypi2-sr/, Raspberry Pi 2 – Speech Recognition on device]
* [https://pypi.python.org/pypi/SpeechRecognition/3.2.0, SpeechRecognition 3.2.0]
* [http://www.speech.cs.cmu.edu/tools/lmtool-new.html, Sphinx Knowledge Base Tool]

Application - Speech Recognition - 修訂紀錄

Tommy：Refactor: add Category:Projects

Tommy：已建立頁面，內容為 "RPi3 + TR10 RPi3 control GPIO by speech recogination == Open source ==
apt-get install rpi-upda…"

Application - Speech Recognition - 修訂紀錄

Tommy：​Refactor: add Category:Projects

Tommy：​已建立頁面，內容為 "RPi3 + TR10 RPi3 control GPIO by speech recogination == Open source == apt-get install rpi-upda…"

Tommy：Refactor: add Category:Projects

Tommy：已建立頁面，內容為 "RPi3 + TR10 RPi3 control GPIO by speech recogination == Open source ==
apt-get install rpi-upda…"