Netgem
目錄
Project info
Customer: Netgem
Product: VDSL/LTE/2.4G/5G media gateway
Main Chip: Lantiq GRX388
SVN info
- Main SDK
- svn+ssh://172.16.1.4/var/svn/Netgem/UGW-5.4/trunk
- file:///var/svn/Netgem/UGW-5.4/trunk
- AR9580
- svn+ssh://172.16.1.4/var/svn/Netgem/atherous/trunk
- file:///var/svn/Netgem/atherous/trunk
Build note
- Using GNU make-3.80 to build the SDK
- Change profile
- ./scripts/ltq_change_environment.sh switch
- Build package only
- make package/feeds/open_applications/protobuf-compile V=99
- Config kernel_only
- If you want, you can also modify the kernel config for the selected target system.
- simply run "make kernel_menuconfig" and the build system will unpack the kernel sources (if necessary), run menuconfig inside of the kernel tree, and then copy the kernel config to target/linux/<platform>/config so that it is preserved over "make clean" calls.
- texinfo should under version 5, for example, texinfo-4.12.tar.gz
- Reference
- Default ID / PASS : root / admin
Programming note
- switch jumper to UART mode
- cat ARX388_GW_HE_ADSL_SLCNAND_SAMPLE/u-boot.asc > /dev/ttyUSB0
- run update_gphyfirmware
- <<before update_nandboot, may run nand scrub to erase whole nand first>>
- run update_nandboot
- switch jumper to NAND
- run update_gphyfirmware
- check "Internal phy firmware version: 0x8434"
Release info
Netgem-GRX388-1.0.0.0
release date
- 2013/09/24
release note
- Day0 patch
- Sync Led with LTE plug/unplug Tx/Rx
- Add plug/unplug script (etc/hotplug.d/usb/netgem_load_drv.hotplug)
- Add Lte routing script (etc/hotplug.d/net/netgem.hotplug)
- Copy wifi & lte deamons into usr/sbin
- Backup .config for SDK and kernel in unihan folder
- Mdify config/VRX388_GW_HE_VDSL_NON_BOND_LTE_SLCNAND_SAMPLE/.config for Netgem HW design
Netgem-GRX388-1.0.0.1
release date
2013/10/07
release note
- Change UGW path to trunk in atherous Makefile
- Skip copy iwconfig into UGW from atherous porting
- Fixing the PPA warning msgs during LTE UL throughput test
- Add release note in SDK
- Move /sbin behind /usr/sbin in order to avoid using wong iwconfig
- Add SW version
Netgem-GRX388-1.0.0.2
release date
2013/10/14
release note
- Enable Statistic/System Performance in Web
Netgem-GRX388-1.0.0.3
release date
2013/10/15
release note
- Add 5G security WPA2 & pass:12345678
- Ath still needs wireless_tools under /sbin
For LTQ 2.4G iwconfig version issue, just do not copy iwconfig to /sbin
- Force 5G to HT40 MCS rate
Netgem-GRX388-1.0.0.4
release date
2013/10/18
release note
- Change usb0 as lte0 for performance graphic
Netgem-GRX388-1.0.0.5
release date
2013/10/18
release note
- No more change but atherous SDK which remove wireless_tools for confuse 2.4G/5G switching
- Add dual WAN support in config/VRX388_GW_HE_VDSL_NON_BOND_LTE_SLCNAND_SAMPLE
Netgem-GRX388-1.0.1.0
release date
2013/12/11
release note
- Sync led when TX/RX
- Fixed - 2.4G/5G switching issue by patches
- patch 01-01-00-UGW-5.4-SW-CD-WLAN-patch
- patch 02-01-00-UGW-5.4-SW-CD-WLAN-3.4.1-patch
- patch UGW-5.4-ATHEROS-CD
- Support 5G control from web
Netgem-GRX388-1.0.1.1
release date
2013/12/20
release note
- To indicate the wifi deamon the AP is down or up
- Add Dual_Wan and DNS solutions which provided by Ltq
